Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
96
Insert the soft-close mechanism
on the door hinge side (at an angle
initially) so that it clicks into position.
Then press the other end of the soft-
close mechanism into the opening.
Secure the soft-close mechanism
with the screw.
Fit the bearing bush supplied into the
upper appliance door
Fit the bearing bush (supplied with
the appliance) in the opening on the
lower edge of the appliance door.
Remove the bearing bush from the
opposite side.
Tip: Keep the bearing bush in case you
want to change over the door hinging
again at a later date.
Changing over the bearing bush
stopper
Pull the stopper out of the door bear-
ing bush and replace it on the op-
posite side.
Loading ...
Loading ...
Loading ...