Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
101
Only use the stainless steel hose
supplied. The stainless steel hose
must not be shortened, extended or
replaced by a different hose.
The stainless steel hose must only
be replaced by an original Miele
spare part. The food-grade, stainless
steel hose is available to order from
the Miele webshop, from the Miele
Customer Service Department or
from your local Miele dealer.
A stopcock must be provided between
the stainless steel hose and the mains
water supply to ensure that the water
supply can be cut off if necessary.
Make sure that the stopcock is still
accessible after the refrigeration ap-
pliance has been installed.
Solenoid valve
Stopcock
The stainless steel hose supplied is 4'
11" (1.5 m)m long.
Water supply
Ensure that the connections are tight
and leak-proof.
Risk of damage to the stainless
steel hose.
The water supply from the tap to the
ice cube maker has been interrupted.
Do not bend or damage the stainless
steel hose.
A stopcock with a metric R3/4thread
must be incorporated when connect-
ing to the water supply.
The solenoid valve is located at the
back of the refrigeration appliance on
the bottom right. It also has a metric
R3/4thread.
Danger of injury from damaged
tool.
If exposed to very high or very low
temperatures, the tool supplied can
become brittle and break.
Use the tool at room temperature
only.
Loading ...
Loading ...
Loading ...