Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
82
Place the appliances next to each
other so that the fronts are aligned,
leaving a gap of slightly over 40mm
between them.
Remove screws and keep them for
the next step. They are needed for
securing connecting bracket with.
The upper connecting bracket is fit-
ted to align both appliances in height
and depth with each other. If one ap-
pliance stands higher than the other,
start with the higher one first.
Fit the upper connecting bracket
to the pins on the appliance and se-
cure it follows:
1. Secure connecting bracket in pos-
ition using the screw that you have
just unscrewed from the appliance,
and screws.
2. Now press the second appliance up
against the spacer piece on the con-
necting bracket.
3. Secure connecting bracket in pos-
ition on the second appliance using
the screw that you have just un-
screwed from the appliance, and
screws. When doing so push the
appliances together slightly.
Loading ...
Loading ...
Loading ...