SPQ1386 Page 1 / 2
SLATE WATER FOUNTAIN WITH CLOCK AND LED LIGHT
GSI-842
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
ASSEMBLY
1. Connect the pump to the fountain body.
2. Gently lay the front plate on the front of the basin. Place the spotlight on the front plate and run the cord out
the back of the basin. Firmly connect the AC adapter.
3. Gently place the fountain body onto the basin, ensuring the pump power cord runs out the groove in the
back of the basin. Secure the fountain body to the basin with the washers and bolts.
4. Place the copper tubes into the pre-drilled holes on the fountain body. Hang the clock on the copper tubes.
5. Place the L-shaped cover on the fountain body and secure with washers and bolts.
6. Gently place the decorative stones in the basin.
7. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 3 gallons.
8. Plug the power cords into properly grounded GFCI outlets.
Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.
01/2020
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
NOTE: The water tubing is built into the fountain
body. Take care when handling the water tube;
detaching the water tube from the fountain will
damage the fountain and void the product warranty.
The copper components may patina; this is a natural
characteristic of copper and is not cause for return
or replacement.
A Basin 1
B Electric Submersible Pump 1
C Spotlight with AC Adapter 1
D Front Plate 1
E Washer 2
F Bolt 2
G Fountain Body 1
H L-Shaped Cover 1
I Washer 1
J Bolt 1
K Copper Tube 3
L Clock
1
M Decorative Stones 1 PK
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Loading ...
