Loading ...
Loading ...
Loading ...
2120
PULSE
TECHNIQUE
Because the NutriBullet’s motor is so powerful, it emulsifies the
ingredients when you extract. That is why when you want to make
foods such as chunky salsa, or coarse chopped onions, the Pulse
technique is key. Pulsing takes a tiny bit of getting used to, but
once you get a feel for it, you’ll be a Pro in no time!
To Pulse, you simply press down on the cup very quickly and
immediately release. For foods that you want coarsely chopped, a quick
tap on the top of the Cup is all you need. Then let the Blades come to a
complete stop and tap again until you get the consistency you desire.
THE SECRET:
The trick to successful Pulsing is to make sure
that the machine doesn’t accidentally slip into Lock On mode. To
avoid this, simply use your other hand to apply counter-clockwise
pressure on the Cup as you Pulse.
1
To start, hold the cup at the base and apply
counter-clockwise pressure to it, to keep it
from locking on.
2
With your other hand, tap the top of the Cup
and immediately release. Continue Pulsing until
you get the consistency you want.
1
Remove the Cup and Blade
assembly from the Power Base.
2
With the Cup and Blade
assembly in hand, shake it like
a cocktail shaker. Then put it
back on the Power Base.
3
To turn o the NutriBullet
— simply twist in the opposite
direction (to the right) to
release the tabs and stop
pressing down on the Cup.
Once the Power Base stops
completely, remove the Cup
from the Power Base.
SHAKE
TECHNIQUE
Sometimes, if you pack down the ingredients in the Cup or don’t
put in enough water, the results can increase the density of the
mixture. This makes it hard for the ingredients toward the top of
the Cup to make it down to the Blade. If some of your ingredients
are having a hard time making it down to the Blade, simply use
the Shake technique.
CAUTION: Do not run the Power Base in excess of 1 minute per interval. Do not run
the Power Base for more than three 1-minute intervals without allowing it to cool
for 2-3 minutes aer the third extraction. Running the motor for more than 1 minute
consecutively in any interval may result in permanent damage to the Power Base.
Loading ...
Loading ...