Loading ...
Loading ...
Loading ...
1918
EXTRACTING
1
Fill ingredients into the Tall or Short Cup.
2
Add the liquid of your choice up to the MAX line.
(Liquid is required!).
3
Twist the Extractor Blade onto the Tall Cup
and hand tighten to make sure the vessel has
been sealed.
4
Press the vessel blade side-down onto the
Power Base. Press down and twist to extract
for no longer than 1 minute. If more extraction is
needed, wait 1 minute, then repeat the extraction
process in 1 minute intervals up to 3 times as
needed to achieve the desired consistency. If more
than three 1-minute extractions are needed, allow
the power base to cool for 2-3 minutes aer the
third extraction before beginning the next round.
You can see the extraction process happening.
Keep an eye on the consistency. Your NutriBlast is
ready when it looks smooth and creamy!
HOW IT WORKS
CAUTION:
• Do not run the Power Base in excess of 1 minute per interval. Do not run the Power
Base for more than three 1-minute intervals without allowing it to cool for 2-3
minutes aer the third extraction. Running the motor for more than 1 minute
consecutively in any interval may result in permanent damage to the Power Base.
• Friction from the rotating blade when extracting can cause ingredients to heat
and generate internal pressure in the sealed vessel.If the vessel is warm to touch,
allow to cool before carefully opening pointed away from your body.
5
To turn o the NutriBullet — simply twist in
the opposite direction (to the right) to release the
tabs and stop pressing down on the Cup. Once
the Power Base stops completely, remove the
Cup from the Power Base.
Check out NutriLiving.com
for recipes, advice, Q&A
from our NutriBullet
Registered Dietitians!
Loading ...
Loading ...
Loading ...