Loading ...
Loading ...
Loading ...
en Microwave
20
Starting drying
To dry the cooking compartment, it is heated up so that
the moisture in the cooking compartment evaporates.
You will then need to open the appliance door to allow
the steam to escape from the cooking compartment.
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
1. Leave the appliance to cool down.
2. Remove the worst dirt from the cooking
compartment immediately and wipe away moisture
from the cooking compartment floor.
3. If necessary, touch the # touch button to switch the
appliance on.
4. Touch the 0 touch button to display the operating
modes.
5. Use the ( or ) button to select "Drying ª".
6. Use the & button to navigate to the next line.
The duration is displayed. It cannot be changed.
7. Use the & button to navigate to the next line.
8. Touch the # touch button.
The drying function is started and is ended
automatically after 10 minutes.
9. Open the appliance door and leave it open for 1 to 2
minutes so that the moisture in the cooking
compartment can escape.
Setting the microwave to combi-mode
Several types of heating are suitable for combining with
the microwave. The microwave output setting can be
set to 90 W, 180 W or 360 W.
Types of heating available:
1. Touch the # touch button to switch on the
appliance.
2. Touch the 0 touch button.
The main menu appears.
3. Use the ( or ) button to select "Microwave
combination operation ¡".
4. Touch the & touch button.
The "Hot air" default value is shown on the display.
5. Use the ( or ) touch button to set the required type
of heating.
6. Use the & button to navigate to the next line.
Set the desired temperature using the ( or ) button.
7. Use the & button to navigate to the next line.
Use the ( or ) button to set the required microwave
output setting.
8. Use the & button to navigate to the next line.
Use the ( or ) button to set the required cooking
time.
9. Touch the # touch button.
The appliance starts the operation. The cooking time
counts down on the display.
You can change the temperature, microwave output
setting and cooking time at any time. To do this, use the
% or & button to navigate to the required field, and set
the value you want using the ( or ) button.
The cooking time has elapsed
As soon as the end time has been reached, an audible
signal sounds and the appliance ends the microwave
operation automatically.
"x Finished" appears on the display.
Touch the 0 touch button to stop the audible signal.
If you want to set a new cooking time, touch the #
touch button.
Otherwise, touch the # touch button to switch off the
appliance.
Pausing the operation
Touch the # touch button to pause the oven. Press the
# touch button again to continue the operation.
Opening the appliance door interrupts the operation.
The operation continues to run automatically when the
door is closed.
Cancelling the operation
Touch the # touch button.
‚
Hot air
ƒ
Top/bottom heating
‡
Circo-roasting
ˆ
Grill, large area
‰
Grill, small area
Loading ...
Loading ...
Loading ...