Loading ...
Loading ...
Loading ...
HEIGHT
SELEOTIONAND
SETTING
To select a pile height setting:
Turn off the cleaner. Select a pile height setting by
tilting the cleaner back until the front wheels are
lifted slightly off the floor.
Slide the height adjustment lever to the correct
setting.
SUGGESTEDPILEHEIGHTSETTINGS
You may need to raise the height to make some jobs
easier (such as scatter rugs and longer pile carpets).
Suggested settings are:
HIGH: shag carpet, long pile, plush, scatter rugs.
MED: medium to long pile.
LOW: short to medium pile.
EX LO:very low pile.
Personal Injury Hazard
DO NOT place hands or feet underneath the unit
when changing from the bare floor setting to the
carpet pile height setting: The brush assembly
begins to revolve rapidly when the vacuum is
turned on and isswitched to a carpet height setting.
FLOOR
SETTING
(SOME MODELS)
To select the bare floor setting:
Turn off the cleaner.
Tilt the cleaner back until the front wheels are lifted
slightly off the floor.
Slide the height adjustment lever to the bare floor
setting.
In this position, the headlight isoff and the brush
assembly does not revolve. Thissetting isrecom-
mended for cleaning hardwood and tile floors.
EEEEEERELEASINGTHE
HANDLE
Release the
handle by
pressing
down on the
handle
release pedal
with your foot
and pulling
down on the
handle with
your hand.
Handle
Release Pedal
5
Loading ...
Loading ...
Loading ...