Loading ...
Loading ...
Loading ...
STORAGE
Never store your Chain Saw for o_er 30 days without perform-
ing the following procedures:
_,, Drain o{1and fuel tanks in a safe area.,
2o Start Saw and run at idle speed until the engine stops,
This will remove most of the fuel from the fuel system.
3. Remove the Spark Plug and pour a teaspoonful of oil
through the spark plug hole into the combustion chamber
(Fig,, 52)° Pull the starter rope slowly several times to dis-
tribute the oil throughout the engine. Replace the Spark
Plug tightly and pull rope until resistance is felt, closing
intake and exhaust ports°
4., Remove and clean the Bar and Chain (use gloves when
handling chain).
5, Store the Chain in a container with oil covering chain,
6. Apply a heavy film of oil over the entire Bar including the
groove for the chaim Wrap bar in heavy paper, cloth or plas_
tic.
7, Clean the outside surfaces of the saw,
8,, Cover the saw with a protective cloth or plastic and store
the saw and bar in a dry place. Always store away from
possible source of ignition such as furnaces heaters, etc_
Sears, Roebuck and Co. reserves the right to make any changes
in design or improvements without imposing any obligation to
install the same upon its items heretofore manufactured°
Loading ...
Loading ...
Loading ...