Loading ...
Loading ...
Loading ...
• Trigger Switch - Ensure switch func-
tions properly by pressing and re-
leasing the trigger switch. Make sure
motor stops.
• Debris Shield - Discontinue use of
unit if debris shield is damaged.
AFTER EACH USE
INSPECT AND CLEAN UNIT AND LA-
BELS
• After each use, inspect complete
unit for loose or damaged parts.
Never use a damaged trimmer.
• Clean the unit using a damp cloth
with a mild detergent.
• Wipe off unit with a clean dry cloth.
• Use a soft brush to clean around the
inside of the debris shield, the cut-
ting head and the motor housing air
vents.
' _ Air Vents
fu
• Remove the wheel by pressing one
of the buttons. Clean the wheel and
groove on the motor housing with a
soft brush. Reinstall wheel (see AS-
SEMBLY section).
REPLACING THE LINE
_WARNING: Disconnect unit
from power source before servicing.
1. Press and hold in the two cap re-
lease latches.
2. Pult cap away from the hub.
Cap
Cap
release
Spool latch
Hub _ Eyelet
13
Loading ...
Loading ...