Loading ...
Loading ...
Loading ...
35
BURNER REMOVAL
1. Remove the cooking grid and vaporizer panel from above
the burner that is to be removed and set them aside.
2. Locate the burner clip (located over the rear center tube
of the burner) and slightly pinch and remove the clip from
the burner support. See Fig. 35-1.
3. Carefully lift the burner from the burner support anchor
peg holes and out from the hole in the forward fire wall.
4. To replace the burner, slide the open cylindrical end of the
burner around the orifice, enveloping it and centering on
it. Then lower the back end anchor pegs into the burner
support anchor peg holes.
Note: It is critical to the continued safe functioning of the burners
that the orifices are centered and completely inside
the burner gas inlets.
5. Re-install the burner clip around the burner and into the
holes in the burner support.
6. Replace the cooking grid and vaporizer panel.
Fig. 35-1 Main burner removal
Remove
burner clip
SERVICING AND CLEANING (Cont.)
Loading ...
Loading ...
Loading ...