Loading ...
Loading ...
Loading ...
8
4. TURNING THE APPLIANCE ON
Please note:
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
(A9) and is collected in the drip tray (A19) underneath. Avoid
contact with splashes of water.
• To turn the appliance on, p
ress the button (A7) (g.
7).
7
• After heating, the appliance automatically performs a rinse
cycle. As well as heating the boiler, this also heats the in-
ternal circuits by circulating hot water.
The appliance is ready for use when the main screen appears.
5. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
1. To turn the appliance o, press the button (A7) (g.
7).
2. If provided for, the appliance performs a rinse cycle then
goes o (stand-by).
Please note:
If you will not be using the appliance for some time, unplug
from the mains socket:
1. First turn the appliance o by pressing the
button
(A7) (g. 7);
2. Disconnect the appliance by unplugging it from the mains
socket.
Important!
Never unplug while the appliance is on.
6. MENU SETTINGS
The menu has 5 items, some divided into subgroups:
• Rinsing;
• Language;
• Maintenance:
- Descale,
- Install lter,
- (if a lter has been in-
stalled): Replace lter,
- (if a lter has been in-
stalled): Remove lter
• General:
- Set temperature,
- Water hardness,
- Auto-o,
- Energy saving,
- Beep,
- Default beverages,
- Default values;
• Statistics.
6.1 Rinsing
Use this function to deliver hot water from the coee spouts
(A9) and hot water spout (C6), if inserted, to clean and heat the
appliance’s internal circuit.
1. Place a container with a minimum capacity of 200ml under
the coee and hot water spouts (g. 6);
2. Press
(B2) to enter the menu;
3. Press the scrolling arrows (B3) or (B10) until
the required item is displayed;
4. Press (B11): after a few seconds, hot water is deliv-
ered rst from the coee spouts, then from the hot water
spout (if inserted) to clean and heat the appliance’s inter-
nal circuit;
5. To stop rinsing, press or wait for rinsing to stop
automatically.
Please note:
• If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the grounds container (A17)
to contain water.
6.2 Language
To modify the language of the display, (B1) proceed as follows:
1. Press (B2) to enter the menu;
2. Press the scrolling arrows (B3) or (B10) until
the required item is displayed;
3. Press
(B11);
4. Press the scrolling arrows
(B3) or (B10) until
the required language is displayed;
5. Press (B11): The appliance goes back to the menu;
6. Then press (B2) to exit the menu.
6.3 Maintenance
Here you can nd all the maintenance operations required by
the appliance over time:
• Descaling: For instructions on descaling, see section "12.
Descale".
• Install lter/Replace lter/Remove lter: For instruc-
tions on how to install/replace/remove the lter (C4), see
section "14. Water softener lter".
6.4 General
Here you can nd the settings to customise the basic functions
of the appliance:
Loading ...
Loading ...
Loading ...