Loading ...
Loading ...
Loading ...
21
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
Fill beans container
ESC to cancel
The coee beans have run out. Fill the beans container (A4) (g. 8).
The pre-ground coee funnel (A4) is clogged. Empty the funnel with the help of the brush
(C5) as described in section "11.8 Cleaning the
pre-ground coee funnel".
Ground too ne
Adjust grinder
ESC to cancel
The grinding is too ne and the coee is deliv-
ered too slowly or not at all.
Repeat coee delivery and turn the grinding
adjustment dial (A5) (g. 11) one click clockwise
towards "7" while the coee grinder is in oper-
ation. If after making at least 2 coees delivery
is still too slow, repeat the correction procedure,
turning the grinding adjustment dial anoth-
er click (see section "7.4 Adjusting the coee
grinder"r"). If the problem persists, make sure
the water tank (A14) is fully inserted.
If the water softener lter (C4) is present, an
air bubble may have been released inside the
circuit, obstructing delivery.
Insert the hot water spout (C) in the appliance
and deliver a little water until the ow be-
comes regular.
Less coee
ESC to cancel
Too much coee has been used.
Select a lighter taste by pressing
(B11)
or reduce the quantity of pre-ground coee.
Insert water spout The hot water spout (C6) is not inserted or is
inserted incorrectly.
Fully insert the hot water spout (g. 5).
Insert milk container The milk container (D) is not inserted correctly. Insert the milk container (g. 16) as far as it
will go.
Insert infuser assembly The infuser has not been replaced after
cleaning.
Insert the infuser as described in section "11.9
Cleaning the infuser".
Water circuit empty
Fill water circuit
Hot water
Conrm?
The water circuit is empty.
Press
(B11) and deliver water from the
spout (C6). If the problem persists, make sure
the water tank (A14) is fully inserted.
Press OK to CLEAN The milk container (D) has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
To proceed with the CLEAN function press
(B11) or turn the froth adjustment dial
to another position.
Set dial to CLEAN
ESC to cancel
Milk has been delivered recently and the tubes
inside the milk container (D) must be cleaned.
Turn the froth adjustment dial (D1) to CLEAN
(g. 20).
Turn froth adjustment dial The milk container (D) has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
Turn the froth adjustment dial to one of the
milk froth positions.
Descale
ESC to cancel
OK to descale
(∼45 minutes)
The machine must be descaled. The descaling procedure described in section
"12. Descale" needs to be performed.
→
Loading ...
Loading ...
Loading ...