
FOR BLACK BACKGROUND ONLY
cyan background for visual,
do not print
1000 LUMEN RECHARGEABLE
LED WORK LIGHT
370-5486
OPERATOR’S MANUAL
To Reduce The Risk Of Injury, User Must Read And
Understand Operator’s Manual. Save These Instructions For Future Reference.
CAUTION:

2
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS
BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious personal injury.
PRODUCT USE AND CARE
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY.
•Always unplug the charger/adaptor from light and power source when not in use.
•Do not look directly at the lighted lamps to avoid eye injuries.
•Always keep the work light away from any flammable surface or materials.
•Always check damaged or worn-out parts before using the work light.
Broken parts
will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed,
consult a professional electrician.
•Do not use a pressure washer to clean this product.
•Do not modify the work light in any way.
Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the work light was designed.
•Store work light in a secure place out of the reach of children. Inspect it for good
working condition prior to storage and before re-use.
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM-ION BATTERY POWERED
PRODUCTS
This work light is powered by a Lithium-ion battery. Lithium-ion batteries are small, compact and ideal for providing
long-lasting power to this product. However they must be used and charged properly. Improper use can result in
serious injury, fire or death.
CAUTION: This product comes with the battery installed internally. You are
not allowed to install or remove the battery from the product.
•Donotplacethislithium-ionbatterypoweredproductinre
or apply heat to it.
•Donotapplystrongimpactorshocks to this lithium-ion battery powered product.
•Donotallowthelithium-ionbatterytogetwet.
•Donotleavethislithium-ionbatterypoweredproductinthedirectsunlight,
or use
or store it inside cars in hot weather. Doing so may cause the battery to generate heat, rupture, or ignite. Using the
battery in this matter may also result in a loss of performance and a shortened battery life.
•NEVER THROW WATER ON A BURNING LITHIUM-ION BATTERY!
If a lithium-ion
battery does catch on fire, it will burn even more violently when contacted with water. Use a fire extinguisher.
•Storetheproductattemperaturebetween41°Fand77°F(5°Cand25°C).
SAVE THESE INSTRUCTIONS
IMPORTANT BATTERY INFORMATION: DISPOSING OF THE BATTERY
• YourbatteriesareLITHIUM-IONrechargeablebatteries.CertainLocal,Stateand
Federal laws prohibit disposal of these batteries in ordinary trash.
• Consultyourlocalwasteauthoritiesforyourdisposal/recyclingoptions.
• MoreinformationregardingbatterydisposalinU.S.andCanadaisavailableat;
http://www.rbrc.org/index.html,orbycalling1-800-822-8837(1-800-8BATTERY).

3
SPECIFICATIONS
Output Power: ........................... 10 Watts
Brightness: ................................ 1000/500 Lumens
ColorTemperature:.................... 5000KBrightWhite
Run Time: ................................... 2/4 Hours
Battery: ...................................... Lithium-Ion 3.7V, 4.0Ah
Recharge Time: .......................... 5 Hours
NetWeight:.................................0.78lb
OVERVIEW
UNPACKING AND CONTENT
IMPORTANT! Due to modern mass production techniques, it is unlikely the product is
faulty or that a part is missing. If you find anything wrong, do not operate the product until the
parts have been replaced or the fault has been rectified. Failure to do so could result in serious
personal injury.
CONTENTS IN PACKAGE
Description QTY Description QTY
Worklight 1 USBChargingCable 1
Operator's Manual 1
1. Frosted Lens
2. Stand/Handle
3. On/Off Switch
4. Battery Power Indicator
5. ChargingPort
6. 1/4" Thread Hole for Tripod Mount
7. USBChargingCable
1
7
4
3
2
5
6

4
OPERATION
CHARGING THE WORK LIGHT (FIG 1)
Thisrechargeableworklightisshippedwiththebatterypartiallycharged.Chargetheworklightafterpurchaseand
before first use by connecting the included USB charging cable to a USB power output, a cellular phone power adaptor
or a laptop USB port for example.
1. Make sure the work light is off.
2. Lifttherubbercovertoexposethechargingport(5).
3. ConnectthemicroendoftheUSBchargingcabletothechargingport.
4. ConnecttheUSBendofthechargingcabletoaUSBpoweroutput(notincluded).
5. Thebatterypowerindicator(4)willbeashingblue,indicatingchargingisinprogress.
6. Once all 4 bars of the power indicator turn solid blue, the charging is completed.
STAND/HANDLE (FIG 1)
Thestand/handle(2)rotates180°toturnittobeastand,acarryinghandleorinaatstorageposition.Thereisa1/4"
metal screw hole in the middle for a tripod mounting.
ON/OFF SWITCH (FIG 1)
TheworklightisequippedwithanOn/Offswitch(3).Presstheswitchoncetoturntheworklightonatitsfullbrightness
press the switch a second time to be its half brightness, and press the switch the third time to turn it off
NOTE: The work light is always on its brightest setting when switched on.
MAINTENANCE
WARNING: Do not modify the work light in any way. Unauthorized modification
may impair the function and/or safety and could affect the life of the product. There are specific
applications for which the work light was designed.
Therearenouser-replacableparts.Periodicallyinspecttheconditionofadaptors,connectorsandwires.Contactthe
manufacturer to replace any components that have become worn or broken.
WARRANTY
Thisproductiswarrantedfreefromdefectsinmaterialandworkmanshipfor1(one)yearsafterdateofpurchase.This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
SAVE YOUR RECEIPTS, THIS WARRANTY IS VOID WITHOUT THEM
HELP LINE
For questions / comments, technical assistance or repair parts -
Please call toll free at:
1-800-868-7421(M-F8am-5pmEST)
2020/07 V01
Menard,Inc.,EauClaire,WI54703
