Loading ...
Wool - Woolmark Apparel Care - Green:
the wool wash cycle of this machine has been approved
by The Woolmark Company for the washing of wool
garments labelled as “hand wash” provided that the
garments are washed according to the instructions issued
by the manufacturer of this washing machine. Follow the
garment care label for drying and other laundry
instructions. (M1135)
Ultradelicates: use programme to wash very delicate garments
having strasses or sequins.
We recommend turning the garments inside out before washing and
placing small items into the special bag for washing delicates. Use liquid
detergent on delicate garments for best results.
When selecting an exclusively time-based drying function, a drying cycle
is performed at the end of the wash cycle that is particularly delicate,
thanks to light handling and appropriate temperature control of the
water jet.
The recommended durations are:
1 kg of synthetic garments --> 160 min
1 kg of synthetic and cotton garments --> 180 min
1 kg of cotton garments --> 180 min
The degree of dryness depends on the load and fabric composition.
To wash Silk garments and Curtains, select cycle and then option
; the machine will end the cycle while the laundry is soaking and the
indicator light will ash. To drain the water so that the laundry may
be removed, press the START/PAUSE button or the button.
Rinse: designed for rinsing and spinning.
Spin + Pump out: designed to spin and drain the water.
Drying Cottons: cycle studied for driyng cotton fabrics.
Drying Wool: cycle studied for driyng wool fabrics.
FIRST-TIME USE
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the
cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.
- Press the button. All the indicator lights will illuminate for 1 second
and the text AQUALTIS will appear on the display; the indicator light
corresponding to the button will then remain lit in a constant manner
and the START/PAUSE indicator light will ash.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the “DETERGENT DISPENSER
DRAWER” section.
- Close the door.
- Turn the PROGRAMME KNOB left or right, until the required programme
has been selected; the name of the programme will appear on the
display. A temperature and spin speed is set for each programme; these
may be adjusted. The cycle duration will also appear on the display.
- Modify the temperature and/or spin speed: the machine automatically
displays the maximum temperature and spin speed values set for the
selected cycle, or the most recently-used settings if they are compatible
with the selected cycle. The temperature can be decreased by pressing
the button, until the cold wash “OFF” setting is reached. The spin
speed may be progressively reduced by pressing the button, until it is
completely excluded “OFF”. If these buttons are pressed again, the
maximum values are restored.
- Select the desired options.
STARTING CYCLE
Press the START/PAUSE button.
The machine will lock the door ( symbol on) and the drum will start to
rotate; the door will be unlocked ( symbol OFF) and then locked again (
symbol on) as preparation phase of each washing cycle. The “Clicking”
noise is part of the door locking mechanism. Water will enter the drum
and start the washing phase once the door is locked.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle; the
indicator light will ash amber. If the symbol is not lit, the door may be
opened. Press the START/PAUSE button again to continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washer-dryer
using the START/PAUSE button (the relative indicator light will ash
amber), then select the desired cycle and press the START/PAUSE
button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
AT THE END OF THE WASH CYCLE
This is indicated by the illuminated text END. The porthole door may be
CHANGE LANGUAGES
The rst time the machine is switched on, the rst language will ash on
the display. The “ “, “OK” and “V” symbols will appear on the display, in
line with the 3 buttons on the right-hand side. The languages change
automatically every 3”; alternatively, they can be changed by pressing the
buttons next to the “ “ and “V” symbols. Use the “OK” button to conrm
the language, which will be set after 2”. If no buttons are pressed, the
automatic language change will begin again after 30”.
To change the language, switch the machine on and o again; in the 30”
time period after it has been switched o, press and hold the temperature
+spin +delayed start buttons simultaneously for 5’’. A short
sound alert will be emitted and the set language will ash on the display.
Press the buttons next to the “ “ and “V” symbols to change the language.
Use the button next to the “OK” symbol to conrm the language, which
will be set after 2”. If no buttons are pressed, the language set previously
will be displayed after 30”. Switch on the machine.
WASH CYCLE PHASE ICONS
These illuminate to indicate the progress of the wash cycle (Wash –
Rinse – Spin/ Drain – Drying ). The text lights up when the
cycle is complete.
GREEN INDICATOR LIGHT
The icon lights up when, after altering the washing parameters, an
energy saving of at least 10% is made. Furthermore, before the machine
enters “Standby” mode, the icon will light up for a few seconds; when the
machine is switched o the estimated energy saving will be around the
80% mark.
BUTTONS M1-M2
press and hold one of the buttons to store a cycle with your own set
preferences in the memory of the machine. To recall a previously-stored
cycle, press the corresponding button.
CONTROL PANEL LOCK
To activate or deactivate the control panel lock, press and hold the
button for approximately 2 seconds. when the indicator light is
illuminated, the control panel is locked (apart from the ON/OFF button).
This means it is possible to prevent wash cycles from being modied
accidentally, especially where there are children in the home.
LOCK INDICATOR LIGHT
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button; if the symbol is o, the door can be opened.
WHASH CYCLES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Drying Synthetics: cycle studied for driyng Synthetics fabrics.
: For washing normally soiled cotton garments declared to be
washable at 40 °C or 60 °C, together in the same cycle. This is the standard
cotton programme and the most ecient in terms of water and energy
consumption.
: For washing lightly soiled cotton garments, at a temperature of 20 °C.
Steam Refresh: This programme refreshes garments by removing bad
odours and relaxing the bres (2 kg, roughly 3 items). Insert dry items
only (that are not dirty) and select programme . The garments will be
damp once the cycle is completed, so we recommend hanging them to
dry. The programme makes ironing easier. Garments will be a little
damp at the end of the cycle and can be worn after a few minutes.
Moreover, with the “Steam Perfume” laundry balls, your favourite perfume
can be added to your laundry. Place a few drops of perfume on the sponge
contained inside the laundry ball, close it and insert it into the drum
together with the laundry. Then launch the specic programme . At the
end of the cycle, garments will be relaxed and fragrant
! The indicator light for the option will switch on when this cycle is selected.
! Not recommended for wool or silk garments.
! Do not add too much perfume to the sponge in order to avoid it dripping.
Cotton Hygiene Prewash: extremely soiled whites fabrics.
Cotton: Normally soiled cottons .
Synthetics Resistant: Suitable for washing moderately soiled garments
made of synthetic bres (e.g. polyester, polyacrylic, viscose, etc.) or mixed
synthetic-cotton bres.
Whites: use this cycle to wash white clothes. The programme is
designed to maintain the brightness of white clothes over time.
If the drying function is selected, a drying cycle automatically activates at
the end of the wash cycle that resembles open-air drying, with the added
advantages of preserving garments from yellowing due to sunlight
exposure and preventing loss of whiteness caused by the possible
presence of dust in the air. Drying cycles can only be selected on a level
basis.
Coloureds: use this cycle to wash bright coloured clothes. The
programme is designed to maintain bright colours over time.
Wash&Dry: select programme for washing and drying lightly soiled
garments (Cotton and Synthetic) in a short time. This cycle may be used
to wash and dry a laundry load of up to 1 kg in just 45 minutes. To
achieve optimum results, use liquid detergent and pre-treat cus, collars
and stains.
Loading ...
Loading ...
Loading ...