Loading ...
Loading ...
Loading ...
Care and Cleaning
Built-In Refrigerators
Type 2 bulb
replacement
NOTE:Before replacing the bulbs, review
the light bulb information and WARNING.
Replacing Type 2 bulbs in lamps located in
the top of the Climate Control drawer:
.
.
Set the Master Light switch to the OFFposition
(seeUsing the Master Light switch) and allow
the lamps to cool.
To access the lamps, remove the second
produce pan. SeeDrawer and Pan Remova/
section.
3. The lamps at the back, that face up, can be
lifted out. Toaccess the lamp that shines into
the Climate Control drawer, twist the holder
until the arrow points toward the back of
the refrigerator, then lift up.
4. Turn the lamp _ 1
protector to ! _'_
access the bulb.
NOTE:Always follow bulb manufacturer's
directions for handling and replacing bulbs.
5. Remove the bulb bg holding the base and
pulling straight out. Replace with a new bulb
and replace the lamp protector.
-&WARNING - Lamp protectors
must be replaced or the heat from the bulb
could damage the refrigerator.
_Z ,AVERTISSEMENT:
Vous devez remettre en place les @crans
protecteurs des ampoules pour ne pas
endommager votre r@frig@ateuravec la chaleur
produite par les ampoules.
6. Resetthe Master Light switch to the ON
position.
ClimateControldrawer lamp
23
Loading ...
Loading ...
Loading ...