Loading ...
Loading ...
Loading ...
Ice & Water Dispenser (on some models)
Built-In Refrigerators
Dispenser
with
glass-touch
controls
How it Works
The electronic controls on the dispenser are
truly interactive. The control panel is equipped
with a proximity sensor that causes the panel to
light up as you approach the dispenser (approx.
2 inches).To make a selection, simply touch
the graphic for the feature you want, and the
halo for that feature will light up. When you walk
away from the refrigerator, the lighted graphics
switch off automatically.
@©@
@®®
SpillShelf
\
\
How to Use
.,,.,,.
To dispensewater or ice:selectWATER_, CUBED
ICE_/or CRUSHEDICE9. Then pressthe glass
gently against the top of the dispenser cradle.
The spill shelf is not self-draining. To reduce
water spotting, the shelf and its grille should be
cleaned regularly.
If no water is dispensed when the refrigerator
is first installed, there may be air inthe water
line system. Pressthe dispenser cradle for at
least two minutes to remove trapped air from
the water line and to fill the water system.
To flush out impurities in the water line,
throw away the first gallon of water.
CAUTION: Never put fingers
or any other objects into the ice crusher
discharge opening.
Locking the Dispenser:
Touch CONTROLLOCKfor
3 seconds to lock the dispenser
and control pad. To unlock, touch
it again for 3 seconds.
@
Dispenser Light:
This feature turns the night light
on and off. The light also comes
on when the dispenser cradle is
pressed. If this light burns out, it
should be replaced with a 6 watt
12V maximum bulb. The bulb is available
through GEParts and Accessories, 800.626.2002.
Order part number WR02X10675.
Door Alarm:
To turn the Door Alarm feature on,
touch DOOR ALARM once. To turn
it off, press it again.
When the DOOR ALARM
@
is active, the alarm will flash and beep if you
keep the door open for more than 2 minutes.
10
Loading ...
Loading ...
Loading ...