Loading ...
Loading ...
Loading ...
97
ENGLISH
● Connecting DVD video camera/recorder to PC via PC connection cable
Use the PC connection cable supplied with the DZ-WINPC3(W) optional PC kit to connect the DVD
video camera/recorder to a PC that has been turned off, as shown in the following illustration:
Note: Use the USB device driver provided with the
DVD video camera/recorder, not with the DZ-
WINPC3(W).
Note: When connecting this DVD video camera/
recorder to PC, you can also use a mini-USB B con-
nector 5-pin type cable that is compatible with
USB2.0 (generally available), as well as the PC con-
nection cable.
Note: The PC connection cable does not supply
power to the DVD video camera/recorder. Use the
AC adapter to power the DVD video camera/re-
corder.
Note: The PC connection cable supplied with the
DZ-WINPC3(W) optional PC kit is to be exclusively
used with the DVD video camera/recorder: A gen-
erally available USB cable cannot be used.
Note: Before connecting DVD video camera/re-
corder to PC, disconnect any other cables, such
as AV input/output cable, from the DVD video
camera/recorder.
Note: If you connect this DVD video camera/re-
corder to PC, nothing will appear in the viewfinder
or on the LCD screen. The CHARGE/ACCESS indi-
cator will blink only while the disc is being
accessed.
Note: If you wish to transfer data recorded on
DVD-R disc with this DVD video camera/recorder
to PC, finalize the DVD-R disc (see page 90).
Note: After transferring the data on disc to PC,
keep the original disc as your backup.
To PC connection terminal
Note: When capturing for PC the video data in-
put from another AV device and recorded on disc
in DVD video camera/recorder, note that data
may not be played back correctly.
Note: The DVD video camera/recorder con-
nected to PC should be used at normal room tem-
perature.
Note: Note that Hitachi does not guarantee op-
eration in the following cases:
•If connection is made using a cable other than
that supplied with the DZ-WINPC3(W) PC kit
Note: Connect the DVD video camera/recorder
to PC and use it at room temperature.
Note: Take care that the temperature of this DVD
video camera/recorder, when connected to PC,
does not rise excessively (reference for usage:
approx. 30 minutes at about 30°C.
Note: If you use a PC equipped with DVD-RAM
drive, change the provided UDF file system to the
UDF2.01 file system included in the DZ-WINPC3(W)
PC kit.
Note: If the DVD video camera/recorder is con-
nected to the USB1.1 port of PC, the data transfer
speed will be lower than when it is connected to
USB2.0 port.
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...