Loading ...
Loading ...
Loading ...
B. Duct Cover
1. Slide out of main body (Held into place by
bottom plate screws). (Fig. 3).
Fig. 3
C. Front Wheels and Wheel Support
1. Pry spring leg up and out of track in wheel
support (Fig. 4)
[]
Fig. 4
2. Pivot wheel support up and out of main body.
To reassemble:
Position spring on wheel support with the long
leg inward.
Position spring so that longest leg slides into slot
on main body (Fig. 5).
Fig. 5
Pull short leg of spring backward and hook into
track on wheel support.
Wheels and wheel shaft can be replaced by
removing plastic wheel retainers. Note: Once
wheel retainers are removed they should be
replaced.
D. Hood
Remove 2 screws (Fig. 6) and remove hood.
Fig. 6
E. Height Adjustment Lever
1. Release two lockingtabs and separate cam
and lever (Fig. 7).
Fig. 7
Loading ...
Loading ...
Loading ...