Loading ...
Loading ...
Loading ...
the place you bought it. In this case retain packing.
• It is advisable to wait at least four hours before
connecting the appliance to allow the oil to flow back
in the compressor.
• Adequate air circulation should be around the
appliance, lacking this leads to overheating. To
achieve sufficient ventilation, follow the instructions
relevant to installation. Wherever possible the back of
the product should not be too close to a wall to avoid
touching or catching warm parts (compressor,
condenser) to prevent the risk of a fire, follow the
instructions relevant to installation.
• The appliance must not be locate close to radiators
or cookers.
• Make sure that the mains plug is accessible after
the installation of the appliance
Service
• Any electrical work required to do the servicing of the
appliance should be carried out by qualified electrician
or competent person.
• This product must be serviced by an authorized Service
Center, and only genuine spare parts must be used.
• Queensland service notes：
This appliance employs Hydrocabon Refrigerant type
R600a.It is hazardous for anyone other than an Authorized
Service Person to service this appliance.In Queensland
the Authorized Service Person MUST hold a Gas Work
Authorization for hydrocarbon refrigerants to carry out
servicing or repairs which involve removal of covers.
10
Loading ...
Loading ...
Loading ...