Loading ...
Loading ...
Loading ...
Problem Possible Cause 8olution
Dryer Will Using a regular fuse. Replace with a time-delay fuse.
Not Run Dryer door not firmly closed. Close dryer door tightly.
(cont'd)
PUSH TO START Button Press PUSH TO START Button again.
not firmly pressed.
Controls not set in an Reset controls in an ON position.
ON position.
Lint in Load Lint screen is clogged. Ctean lint screen. Check for air
movement.
Improper sorting. Sort lint givers from tint takers
and by color.
Load is too big or heavy. Dry smaller loads so tint can be
carried to the tint screen.
Load is overdried. Use correct dryer settings for fabric.
Overdrying can cause lint-attracting
static (see "OPERATION").
Paper or tissue in pockets. Clean out pockets before drying.
Pilling being mistaken for tint. Pilling (surface fuzz) is caused by
normal wear and laundering.
Stains on Load Improper use of fabric softener Use fabric softener sheets in dryer. Add
in washer, at beginning of cycle when load is cold.
Drying soiled items. Items need to be clean before
being dried.
Items Overdrying. Match dryer settings to fabric type
Shrinking (see "OPERATION").
Poor garment quality. Check quality of garment before
purchasing.
Manufacturer's care label Fotlow fabric care label instructions
instructions not followed, carefully.
Loads are Overloading. Dry smatter loads that can tumble freely.
Wrinkled Overdrying. Match dryer settings to fabric type
(see "OPERATION").
Load teft in dryer at the Remove toad as soon as tumbling
end of cycte, stops.
Odors Household chemicals, paint, Do not use dryer while these chemical
or varnish being drawn fumes are in the air.
into dryer.
Unusual Thumping of rollers when Thump wilt go away after 5 minutes
Sounds dryer has set. of drying.
Clicking - gas valve clicking. Normal operation.
36
Loading ...
Loading ...