Loading ...
Loading ...
Loading ...
Cleaning and maintenance
47
EN
2. Two minutes after the pyrolytic cycle
has started, the door is locked (the
door lock indicator light
comes on)
by a device that prevents the door from
being opened.
3. At the end of the pyrolytic cycle, the
door remains locked until the
temperature inside the oven cavity
returns to a safe level. Wait for the oven
cavity to cool down and collect the
residues deposited inside using a damp
microfibre cloth.
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time.
1. After selecting the pyrolytic cycle
duration, press the temperature knob.
The display shows the current time and
the indicator light comes on.
2. Turn the temperature knob to set the
time at which you wish to complete the
pyrolytic cycle.
3. After a few seconds, the and
indicator lights remain lit steadily and
the appliance waits for the set start time
to start the cleaning cycle.
It is not possible to select any
function once the door lock device
has been activated.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fan will continue to operate long
enough to prevent the walls of
adjacent units and the front of the
appliance from overheating.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.
It is not possible to select any
function once the door lock device
has been activated.
Loading ...
Loading ...
Loading ...