Loading ...
Loading ...
Loading ...
9
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1. Remove the downrod clip (C) and downrod pin (B)
from the downrod (A). Then partially loosen the
set screws (I) in the yoke at the top of the motor
assembly
(H).
2. Insert the downrod (A) -- or a longer downrod, if
required -- through the canopy (E) and yoke cover (G).
Feed the wires from the fan through the downrod (A).
3. Slide the downrod (A) into the yoke, align the holes,
then re-install the downrod pin (B) and downrod clip
(C). Secure with set screws (I) and slide the yoke
cover (G) down until it rests on top of the motor
assembly (H).
C
A
I
B
G
Yoke
2
3
A
G
E
Yoke
C
A
B
I
H
1
Loading ...
Loading ...
Loading ...