Loading ...
Loading ...
Loading ...
Page 13www.123filter.com | (678) 261-7611 | Support@123Filter.com
exceeding NSF/ANSI standard 58 and should be giving a 90%+ TDS rejection rate, so if
your tap water is 100ppm you should be getting 10ppm or less from the RO water (200/20>,
400/40> etc.). TDS is measured with a TDS meter - it is an inexpensive, easy to use device
that can be found on Amazon.com or 123filter.com by searching “iSpring TDS”.
8.10 Check for leaks daily for the first two weeks after installation to ensure the system is
functioning properly. Install the included Flood Alarm to provide additional peace of mind
and protection.
Congratulations, you have successfully installed your
iSpring Reverse Osmosis Water Filtration System!
Start enjoying fantastic reverse osmosis water right from your tap!
------------------------------------- End of Installation Section ------------------------------------
Loading ...
Loading ...
Loading ...