Kenmore 11071082000 dryer

User Manual - Page 6

For 11071082000.

PDF File Manual, 44 pages, Download pdf file

Loading ...
Loading ...
Loading ...
6
Recommended/Minimum Clearances
Most installations require a minimum 5 in. (12.7 cm) clearance
behind the dryer for the exhaust vent with elbow. See “Venting
Requirements.” The location must be large enough to fully open
the dryer door.
Recommended installation spacing for recessed area or
closet installation
The dimensions shown following are for the recommended
spacing allowed, except the closet door ventilation openings.
The dimensions shown for the closet door ventilation openings
are the minimum spacings required.
1. Recessed Area
2. Side view - closet or confined area
3. Closet door with vents
Additional spacing should be considered for ease of
installation and servicing.
Additional clearances might be required for wall, door and
floor moldings.
Additional spacing of 1 in. (2.5 cm) on all sides of the dryer is
recommended to reduce noise transfer.
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are
acceptable.
Companion appliance spacing should also be considered.
Mobile home installations require:
Mobile home Installation Kit, Part Number 346764.
Electrical Requirements
120-Volt, 60-Hz., AC-only, 15- or 20-ampere fused electrical
supply is required. (Time-delay fuse or circuit breaker is
recommended.) It is recommended that a separate circuit
serving only this dryer be provided.
Back Sides Top Front
(Closet only)
Recessed and
Closet
5”/0”
(12.7 cm)
1”/0”
(2.5 cm)
18”/18”
(45.7 cm)
1”/1”
(2.5 cm)
"
"
"
"
"
"
"
"
"
"
"
"
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Do not use an extension cord.
Do not use an adapter.
Do not remove ground prong.
Loading ...
Loading ...
Loading ...