Loading ...
Loading ...
Loading ...
en Troubleshooting
48
Fault Cause and troubleshooting
Appliance switches off
during use.
Processing quantity is too great or processing time
was too long.
▶ Set the rotary switch to .
▶ Reduce the processing quantity.
▶ Allow the appliance to cool down to room temperat-
ure.
The programme does
not start.
The rotary switch is not set to .
▶ Set the rotary switch to .
The programme has been cancelled using the pro-
gramme button.
1. Set the rotary switch to .
2. Press the programme button for the required pro-
gramme.
The To-Go blade in-
sert cannot be con-
nected to the main
unit.
Outlet protection is active.
▶ Screw the To-Go blade insert and the To-Go
blender jug in by turning them in a clockwise direc-
tion.
a The To-Go blender jug and To-Go blade insert are
fully and tightly screwed in.
a The
and markings match up.
The chopper-grinder
accessory cannot be
connected to the main
unit.
Outlet protection is active.
▶ Screw the chopper-grinder blade insert and the
chopper-grinder attachment in place with one rota-
tion in a clockwise direction.
a The chopper-grinder blade insert and the chopper-
grinder attachment are fully and securely screwed
in.
a The
and markings match up.
To-Go blender jug is
leaking.
Seal is missing from the lid.
▶ Insert the seal.
Liquid is leaking from
the blade insert.
Seal between the blender jug and the blade insert is
missing.
▶ Insert the seal on the EasyClick blade insert.
a The seal is seated in the groove.
a The sealing lips point in the direction of the blender
jug.
a The smooth sealing surface lies against the EasyC-
lick blade insert.
Loading ...
Loading ...
Loading ...