Loading ...
Loading ...
Loading ...
CLIMATE-CONTROLLED
DRAWERS
CRISPER DRAWERS
The Crispers provide storage for fruit
and vegetables.There is a humidity
control located on the crisper shelf
above each of the crisper drawers.
➢ For fruit storage,
slide the crisper
control toward
the center to
provide lower
humidity
conditions in the drawer.
➢ For vegetable storage, slide the crisper
control away from the center to
provide higher humidity conditions in
the drawer.
To remove and install crisper
drawers:
➢ To remove
drawer, pull
drawer out
to full
extension.
Tilt up front of drawer and pull
straight out.
➢ To install, insert drawer into frame
rails and push back into place.
ACCESSORIES
EGG CRADLE
(SOME MODELS)
The Egg Cradle holds a
“dozen plus” eggs. It can
be removed to carry to a
work area or to be washed.
WINE TRIVET/CAN RACK
(SOME MODELS)
The Wine Trivet/Can Rack accessory
fits in the bottom
of most drawer
assemblies.
Bottles can be laid
crosswise, or a single bottle may be laid
in the center depression. Cans may also
be stored horizontally.
GOURMET BAY
™
The Gourmet Bay
™
provides a full-
width drawer with a variable
temperature control that keeps the
compartment up to 5° F (3° C) colder
than refrigerator temperature. This
drawer can be used for large party trays,
deli items, or beverages.
Gourmet Bay
™
Control
The control, located on
the right of the drawer,
regulates the air
temperature inside the
drawer. Set control to
‘cold’ to provide normal refrigerator
temperature. Use the ‘coldest’ setting for
meats or other deli items.
To remove and install drawer:
➢ To remove
drawer, pull
drawer out to full
extension. Tilt up
front of pantry
and pull straight out.
➢ To install, push
metal glide rails to
the back of the
unit. Place drawer
onto rails and slide
drawer back until it
falls into place.
HOW DO I REMOVE THE
GLASS AND CRISPER FRAME
IF I WANT TO CLEAN IT?
➢ Remove the drawers as instructed at
left.
➢ Place hand beneath frame to push up
glass from underneath. Lift glass out.
➢ Lift frame from refrigerator liner rails.
➢ To install, repeat above instructions in
reverse order.
Note:
Cold air directed to the drawer can
decrease refrigerator temperature.
Refrigerator control may need to be
adjusted.
12
GOURMET BAY
™
DIVIDER
(SOME MODELS)
The Gourmet Bay
™
Divider is used to
organize the
Gourmet Bay
™
into
sections.
To remove and replace divider:
➢ To remove, raise front of divider to
unhook divider from rear wall of
drawer, and pull out.
➢ To install, hook back of divider over rear
wall of drawer and lower into place.
Note:
For easiest removal and replacement,
remove drawer. If removal is not
possible, pull drawer open to its
fullest extension.
GOURMET BAY
™
TRAY
The Gourmet Bay
™
Tray
allows for a removable
tray within the full-
width storage
drawer.
F
RESH
F
OOD
C
OMPARTMENT
,
CONT
.
Loading ...
Loading ...
Loading ...