Loading ...
Loading ...
Loading ...
T
EMPERATURE
C
ONTROLS
The controls are located at the top front of the refrigerator and freezer compartments. NOTE: The freezer control turns the
cooling system on. Neither section will cool if freezer control is set to off.
INITIAL CONTROL
SETTINGS
After plugging the refrigerator in, set the
controls.
➢ To adjust the controls, turn the
control knob to the left or right as
desired.
• Initially set the refrigerator control
on 4.
• Initially set the freezer control on 4.
• Let the refrigerator run at least 8-12
hours before adding food.
WARM CABINET
SURFACES
At times, the front of the refrigerator
cabinet may be warm to the touch.This
is a normal occurrence that helps
prevent moisture from condensing on
the cabinet. This condition will be more
noticeable when you first start the
refrigerator, during hot weather and after
excessive or lengthy door openings.
TEMPERATURE CONTROL GUIDE
Refrigerator too warm Turn the refrigerator control to next higher number.
Refrigerator too cold Turn the refrigerator control to next lower number.
Freezer too warm Turn the freezer control to next higher number.
Freezer too cold Turn the freezer control to next lower number.
Turn refrigerator OFF Turn the freezer control to OFF.
NOTE: Turning freezer control to OFF stops cooling in both compartments. It does not shut off power
to the refrigerator.
ADJUSTING THE
CONTROLS
➢ Twenty-four hours after adding food,
you may decide that one or both
compartments should be colder or
warmer. If so, adjust the control(s) as
indicated in the table below.
➢ Do not change either control more
than one number at a time when
adjusting controls.
➢ Allow 5-8 hours for temperatures to
stabilize.
➢ Changing either control will have
some effect on the temperature of
the other compartment.
Refrigerator Control
Freezer Control
10
Loading ...
Loading ...
Loading ...