Loading ...
Loading ...
Loading ...
OVERLAY PANELS
(CONT.)
MOUNTING OVERLAY PANELS TO DRAWERMOUNTING OVERLAY PANELS TO DRAWER
the bottom drawer panel.
Mount the bottom drawer panel: Make
sure the height adjustment screw heads are
under the adjusting brackets. Then fit the
attachment brackets over the hanger bolts.
2
3
1
2
3
4
5
Once all brackets and small brackets have been
Leave the vertical adjustment screws
just a few turns in.
applied to the panels, you can begin installing
1
Use the height adjustment screws to align panels
to adjacent cabinets.
The panel has some adjustment sideways when
the hanger bolts are slightly loose.
Depth alignment: working from the inside of
the drawer, use the depth adjusting screws
(4) to push the panel away from the door as
needed, and snug the hanger bolts (5) to
secure the panel in place.
Final adjustment must be done after the
appliance is in place and the side trim mounted.
© 2020 Hestan Commercial Corporation
25
EN
Loading ...
Loading ...
Loading ...