Loading ...
Loading ...
Loading ...
7. Rinsetheheatexchangerandthecapon allsideswith
a jetof waterto completelyremoveall ofthelintand
fluff.
8. Removeall lintandflufffromthesealsonthedryer
andheatexchanger.
9.Allowthecap andtheheatexchangerto dryfully.
10.Firstinserttheheatexchanger,thenthecap.
11.Turnbackbothlockinglevers.
Toclean the moisture sensors:
1. Open the door.
2. The deposit on the sensors can easily be removed by
wiping the sensors (the two bars next to the lint filter)
with a cloth and a little white vinegar.
12. Close the maintanance flap until it locks into position.
NOTICE: Use white vinegar only!
Clean the moisture sensors once a month.
Cleaning the lint filter area
Over time, lint from the drying process collects in the lint
filter area.
This lint can be easily removed using a vacuum cleaner.
13. Look in the Troubleshooting table to reset the
maintenance indication.
---> Troubleshooting; Page 29
Cleaning the moisture sensors
Occasionally the moisture sensors have to be cleaned
because a fine layer of transparent buildup is deposited
on the sensors.
Maintenance of drain hose
If DR indicator lights up check the drain hose for kinks,
restrictions or blockage.
NOTICE: If DR indicator still lights up after the
maintenance, you should contact customer service or
your local dealer.
28
Loading ...
Loading ...
Loading ...