Loading ...
Loading ...
Loading ...
3,
4,
Connect ground wire (green or bare) of direct wire cable to external ground conductor
screw. Tighten screw.
B
C
A. External ground conductor screw
B. Neutral ground wire
C. Ground wir_' Igreen or bare) of power supply cord
D. _4" ( 1.9 cm) U[ listed strain reli_'f
E. (_ulter silver-color_'d terminal block scr_'w
L Neutral wire (white or center wir_')
Place the hooked ends of the other direct wire cable wires under the outer terminal block
screws (hooks facing right). Squeeze hooked ends together. Tighten screws.
I I
5. Tighten strain relief screw.
6. Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-
down screw.
7. You have completed your electrical connection. Now go to "Venting Requirements."
3-wire connection: Power supply cord
Use where local codes permit connecting cabinet-ground conductor to neutral wire.
A ...... /
C G F
1.
2.
A. 3-wire re'ceptacle (NFMA type lO-30R)
B. 3-wire plug
C. Neutral prong
D. Spade' te'rminah with upturned ends
E. _" (t.9 cm) U[ list_,d strain r_'lief
£ Ring t_,rminals
G. Neutral wire (white" or center wir_')
Loosen or remove center silver-colored terminal block screw.
Connect neutral wire (white or center wire) of power supply cord to the center, silver-
colored terminal screw of the terminal block. Tighten screw.
A. [xternal ground conductor scr_'w
B. Neutral ground wir_"
C. C_'nte'r silver-colored terminal block screw
D. Neutral wir_' (white of center wire)
E. _" ( 1.9 cm) U[ listed strain relief
Loading ...
Loading ...
Loading ...