Loading ...
Loading ...
Loading ...
Fan Control Module (FCM) offers the added ability to control the fan speed through six (6)
speeds, a remotely actuated 120V outlet and a constantly powered 120V outlet. The FCM
provides DC power to the Receiver allowing the batteries to be used only when line power is
interrupted or lost (Fig.4).
The Proflame Receiver (Fig. 3) connects directly to the gas valve and stepper motor and Fan
Control Module with a wiring harness. The Receiver is powered by 4 AA type batteries. The
Receiver accepts commands via radio frequency from the Transmitter to operate the appliance
in accordance with with the particular Proflame system configuration. The Receiver three
position slider switch can be set to one of three positions: ON (Manual Override), Remote
(Remote control) or Off.
5
ENGLISH
3 Positions Slider
PRG Key
Fig. 3: Proflame Receiver body.
12 PIN terminal
Fig. 4: Fan Control Module.
MAINS VOLTAGE
SUPPLY CORD
MODULE ON/OFF SWITCH
COMMUNICATION BUS (3 PIN)
FAN OUTLET PLUG
MAINS VOLTAGE PLUG
AUX OUTLET PLUG
FAN CONTROL MODULE
RECEIVER
INSTALLATION
Receiver
The receiver can be placed inside a standard Junction type wall box or a low temperature area
of the appliance.
Wall Mounting
1. Connect the wiring harness to the back of the Receiver.
Loading ...
Loading ...
Loading ...