Loading ...
Loading ...
Loading ...
KNOWING YOUR SEWING MACHINE
5
Seam guide lines
The numbers on the needle plate indicate the distance
between the center needle position and the various seam
guide lines.
The numbers in the front indicate in millimeters.
The numbers in the back indicate in inches.
Setting spool pins
The spool pins are used for holding the spool of thread in order to feed thread to the
machine.
To use, pull up the spool pin. Push down for storage.
Winding the bobbin
1. Place a spool of thread on the left spool pin. Pull the thread out
from the spool and place it through thread guide as shown in
illustration. Put end of thread through the hole in bobbin as
shown.
2. Push the bobbin winding spindle to far left position, if it is not
already there. Place bobbin onto the bobbin winding spindle with
end of thread coming from top of bobbin. Push bobbin winding
spindle to the right until it clicks. Hold onto end of thread.
3. Start machine. Bobbin will automatically stop turning when
completely filled. Push bobbin winding spindle to the left to
remove bobbin and cut thread.
Loading ...
Loading ...
Loading ...