Loading ...
Loading ...
Loading ...
KNOWING YOUR SEWING MACHINE
7
Threading the machine
Raise take-up lever to its highest position by turning
hand wheel toward you.
Raise the presser foot. It is very important to raise
the presser foot before you begin threading, or
correct thread tension cannot be obtained.
Place spool on spool pin as shown, with thread coming
from the back of the spool.
1. Draw thread into thread guide using both hands.
2. Draw the thread down into the tension area and around the
U-turn.
3. Firmly draw thread up and through take-up lever from
right to left.
4. Then draw thread down and slip it into the lower thread
guide.
5. Do not block the thread into double needle spring.
6. Draw thread down and slip it into needle bar thread guide.
7. Thread needle eye from front to back.
Note: Cut the thread end with sharp scissors for easier
needle threading.
Loading ...
Loading ...
Loading ...