P36RAD Southbend

User Manual - Page 17

For P36RAD.

PDF File Manual, 21 pages, Read Online | Download pdf file

P36RAD photo
Loading ...
Loading ...
Loading ...
OWNER’S MANUAL 1186527 REV 6 (8/14)
PAGE
17
OF 21
INFRARED/RADIANT COMPACT BROILER
TROUBLESHOOTING
WARNING
ADJUSTMENTS AND SERVICE WORK MAY BE PERFORMED ONLY BY A QUALIFIED TECHNICIAN WHO IS
EXPERIENCED IN, AND KNOWLEDGEABLE WITH, THE OPERATION OF COMMERCIAL COOKING EQUIPMENT.
HOWEVER, TO ASSURE YOUR CONFIDENCE, CONTACT YOUR AUTHORIZED SERVICE AGENCY FOR RELIABLE
SERVICE, DEPENDABLE ADVICE OR OTHER ASSISTANCE, AND FOR GENUINE FACTORY PARTS.
NOTICE
Warranty will be void and the manufacturer is relieved of all liability if service work is performed by other than a qualied
technician, or if other than genuine Southbend replacement parts are installed.
Replacement parts (including parts not listed in this manual) may be ordered either through a Southbend Authorized Parts
Distributor or a Southbend Authorized Service Agency.
When ordering parts, please supply the Model Number, Serial Number, Part Number, and Part Description.
In case of problems in operation at initial installation, check type of gas and manifold pressure and compare with
information listed on the serial plate.
TROUBLESHOOTING
Problem Look for - 1
- Not enough heat - Low pressure in gas supply
- Restriction in gas piping and/or valves
- Misalignment of burner orice tube
- Clogged burner orice
- Incorrect burner orice
- Too much heat - Incorrect orice.
- Defective or incorrectly set pressure regulator.
- Burner ame uttering or has excessive blue haze - Obstruction of combustion-air intake on rear of broiler
- Exhaust gases blocked by objects sitting on top of broiler
- Low pressure in gas supply
- Misalignment of orice tube
- Burner ame popping (infrared) - Cracked or loose ceramic.
- Slow (or no) burner ignition - Pilot ame out of adjustment
- Pilot alignment out of adjustment
- Thermocouple not in pilot ame (for units with the ame-failure option)
- Pilot outage - Pilot ame out of adjustment
- Draft condition
- Pilot orice clogged
- Incorrect pilot orice
- Thermocouple not in pilot ame (for units with the ame-failure option)
The following table lists the possible causes of oven-related problems that may occur
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...