Loading ...
Loading ...
Loading ...
Operating the Mechanism in your Cabinet
To move from FLATBED POSITION TO
FREE-ARM position: (See FIG. 13, 14 and 15.)
(1.) Remove INSERT
(2.) Lift and tilt machine slightly backwards.
(3.) Rotate release lever to the right, (clockwise)
to unlock.
(4.) Lift and bring machine forward until it locks
into the new position. Listen for CLICK. Let
platform rest on tabs.
To move your machine from FREE-ARM position
to FLATBED position: (See FIGS. 13, 14 and 15).
(1.) Lift and tilt machine slightly forward.
(2.) Rotate release lever to the right, (clockwise) to
unlock.
(3,) Allow the machine to lower into cabinet. When
you hear the CLICK you will know it is in the
FLATBED position. Let platform rest on front
brace.
(4.) Replace INSERT.
FIG. 13
FIG. 15
FIG. 14
FIG. 16
To move machine from FLATBED position to
STORAGE position: (See FIGS. 15, 16 and 17).
(1.) Remove INSERT.
(2.) Once again, lift and tilt machine backwards.
(3.) Rotate release lever to the right, (clockwise)
to unlock
(4.) Lower and push machine backwards and up
until it locks into position. MAKE SURE YOU
HEAR THE CLICK. See FIGS. 16 and 17.
(5.) Replace INSERT in top opening. Should the
Insert not sit flush to the cabinet top, adjust
the Stop Bolt on the back of the cabinet to
lower the machine sufficiently.
Page 7
FIG. 17
98100-7
Loading ...
Loading ...
Loading ...