Loading ...
Loading ...
Loading ...
124 - CLEANING AND MAINTENANCE 914779546/A
13. Press the START button to start draining
the water into the jug (or container).
14.Wait for the end of the drain flow.
When complete, the display will indicate that
the residual water removal process is complete.
Manual descaling
When you wish to perform descaling in
advance, you can run the function manually:
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu button (located in
the lower area ).
3. Touch the DESCALING button .
4. Proceed with descaling as described in the
previous paragraphs.
Cleaning the reservoir and the water
circuit manually
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu button (located in
the lower area ).
3. Touch the CLEAN RESERVOIR
button.
Preliminary operations
1. Fill a jug or a container with approx. 2 litres
of water.
2. Open the appliance door.
3. Place the jug (or container) on the open
door.
4. Remove the loading wand from its holder.
• To remove the loading wand, press on the
front of the wand until the spring contracts,
then release.
or
• Touch the WAND button on the
display (positioned in the lower area ).
5. Place the end of the tube at the bottom of
the jug (or container).
Function that performs descaling of
boiler.
This function allows you to clean the
reservoir and the water circuit of the
appliance.
The jug (or container) with the water
must have a gross weight lower than 5
kg.
Pay attention to the distance to be
maintained so as not to be hit by the
wand projection.
Loading ...
Loading ...
Loading ...