Loading ...
Loading ...
Loading ...
96 - USE 914779546/A
7. When finished, shake the loading wand to
remove any water residue.
8. Place the loading wand back in its holder.
9. Remove the jug (or container).
10.Close the door.
11.Touch the CONFIRM button to confirm
that you have finished filling the reservoir.
The appliance starts the function using the
parameters set.
Preheating stage
Cooking itself is preceded by a preheating
stage, which allows the appliance to heat to the
cooking temperature more quickly.
This stage is indicated by a progressive increase
in the temperature level reached.
After pre-heating, a buzzer will sound and a
message will display to indicate that the food
can be put in the oven.
Cooking phase
1. Open the door
2. Place the dish with the food to be cooked
into the oven cavity.
3. Close the door.
4. Touch the START button to start
cooking.
This stage is indicated by a progressive increase
in the cooking level.
End of cooking
At the end of cooking, "Function ended"
displays and a buzzer sounds briefly, which can
be deactivated by touching any point of the
display or by opening the door.
• Touch the HOME button to quit the
function.
In the event that the water runs out, the
appliance will automatically stop the
cooking process, a buzzer will sound
and the display will show a request to
fill the reservoir with water.
When the door is closed, an automatic
system will automatically draw in any
residual water in the loading wand to
avoid drips. A bubbling noise may be
heard; this is completely normal.
Each time the door is opened, the
function in progress will stop and then
automatically restart when the door is
closed again.
Unless otherwise indicated in the
recipe, it is not recommended to place
food in the oven during the preheating
stage.
You can skip the pre-heating phase by
pressing the button related.
Loading ...
Loading ...
Loading ...