Loading ...
Loading ...
Loading ...
USE - 95914779546/A
e
7. Touch the COOKING DURATION
button or the relevant value.
8. Scroll through the values and select the
required duration.
9. Touch the CONFIRM button to confirm
the selected cooking duration.
10.Touch the START button (at the lower
right ) to start the reservoir filling
procedure.
Reservoir filling
1. Fill a jug or a container with sufficient water
for the cooking duration.
2. Open the appliance door.
3. Place the jug (or container) on the open
door.
4. Remove the loading wand from its holder.
• To remove the loading wand, press on the
front of the wand until the spring contracts,
then release.
fig. 1
or
• Touch the WAND button on the
display (positioned in the lower area ).
5. Place the end of the tube at the bottom of
the jug (or container).
6. Press the start button to start filling the
appliance reservoir with water.
The minutes and seconds can be
selected separately.
The duration of the steam function can
be from a minimum of 1 minute to a
maximum of 1 hour and 59 minutes.
The expected time for the end of
cooking is shown under the duration;
the minutes needed for preheating are
already calculated.
Use cold tap water which is not too
hard, softened water or still mineral
water.
Do not use distilled water, tap water
with a high chloride content (> 40 mg/
l), or other liquids.
The jug (or container) with the water
must have a gross weight lower than 5
kg.
Pay attention to the distance to be
maintained so as not to be hit by the
wand projection.
The appliance will automatically draw
the quantity of water necessary for
cooking on the basis of the set duration.
Loading ...
Loading ...
Loading ...