Loading ...
Loading ...
Loading ...
8
Assembly Instructions
Before You Start
Note the tools you will need before you begin.
Remove any packaging material or protective plastic from
components.
Check for damaged or missing parts, and consult your retailer if
necessary.
Mobile carts and trolleys are optional. You should follow the
separate instructions that came with the trolley before assembling and installing your barbecue.
Check The Cross Lighting Channels
The cross lighting channels should already be in place. If they are not, or if they moved
during shipping, they need to be replaced as follows: place each cross-lighting channel
onto the back support panel. The keyed tabs on the bottom of each cross-light channel
fits into the slots on the burner support rail. The cross lighting channels are required for
all models.
Check The Burners
The burners should already be fitted to the barbecue.
If they are not, or if they moved during shipping, they
need to be replaced as follows:
Remove the retaining clip from the burners. Fit the
burners, open end first, over the stem of the control
valves at the front of the barbecue. Lower the
other end of the burner so the lug locates into the
corresponding hole at the rear of the barbecue.
Replace the retaining clips into the burner lugs so the
burners stay in position. You need to do this from behind the
barbecue, underneath the back panel.
Phillips Head
Screwdriver
adjustable spanner/
wrench
bbq.indd 8 3/02/2006 15:18:38
Loading ...
Loading ...
Loading ...