Loading ...
Loading ...
Loading ...
6
The Discovery series of barbecues comes in both trolley-mounted and built-in models. These two pages
contain information relating to setting up the built-in model only.
General Requirements
We recommend that this installation be done in a masonry structure and carried out by a professional
tradesperson. Other non-combustible material such as Hardiplank, Villaboard with metal studs may also be
used.
This appliance must not be installed under or on any combustible material. Minimum clearance from
combustible construction materials to all sides of the appliance is 450mm (18”).
Warning: Contact your local municipality for any building codes regulating the installation of outdoor barbecue
appliances. Outdoor installations must conform to local codes or, in the absence of local codes, with:
USA: National Fuel Gas Code, ANSI Z223.1/NFPA 54
CAN: B149.1 Natural Gas & Propane Installation Code.
AUST: Australian Standards Code AS: 5601
as well as the requirements of any local council, gas, electricity authority or other statutory regulation.
The Barbecue Cavity
Your barbecue has been designed to sit into a cavity or cutout rather than be placed directly onto a flat
surface. It is important that the dimemsions of the cavity conform exactly to those listed below. This will
ensure the barbecue sits correctly in the cavity, and that the barbecue has sufficient ventilation to operate
efficiently and safely. It also allows room for any roasting hood to open freely,
In creating the cavity, you should ensure that you have convenient access to the gas connection point and
associated hardware:
If the gas for your barbecue is supplied by a portable gas bottle, you will need access to the gas connection
point, the gas hose and the gas cylinder at all times.
If the gas for your barbecue is supplied by a fixed piped gas supply (either natural gas or 45kg LPG
cylinders), you will need access to the gas connection point, the piping and the shutoff valve.
•
•
•
•
•
For Built-In Units Only
Built-in Cavity Dimensions
Width
x 2 20 5/8” 523mm
x 3 27 1/8” 690mm
x 4 33 1/4” 846mm
x 5 39 1/2” 1003mm
bbq.indd 6 3/02/2006 15:18:25
Loading ...
Loading ...
Loading ...