Loading ...
Loading ...
Loading ...
Notebeltroutingaround
idlersandbeltfingers.
1.DriveBelt
2. EnginePulley
3.BentBeltFinger
4. BeltChannel
Figure16
To install the drive belt:
IMPORTANT: Be sure the belt seats in idler
and pulley grooves with the idler touching the
back (flat) side of belt.
1. Install the new belt on the transmission
input pulley and idlers, route it through
the belt channel, and then install the belt
on the engine pulley. See Figure 15 and
Figure 16.
NOTE: Make the sure the belt is inside the
two belt fingers near the engine pulley.
2. Position the bent belt finger so it lightly
contacts the belt, and then tighten it in
position.
Push belt through belt
channel and install it
on the engine pulley.
Figure 17
3. Connect the wheel drive cable spring to
the idler arm as shown in Figure 15, and
then connect the wheel drive cable to
the transmission mount. See Figure 17.
4. Connect the idler return spring to the
idler arm.
5. Install the wave washer and blade
adapter on the crankshaft.
6. Install the center baffle on the mower
deck.
7. Install the blade on the blade adapter.
Make sure the blade hardware is
tightened to the proper torque. See To
install blade: on page 16.
8. Replace the transmission cover.
9. Connect spark plug wire to the spark
plug.
GB - 20
Loading ...
Loading ...
Loading ...