Loading ...
Loading ...
Loading ...
[e]_ =I=I±_i[e]_I
CONTROLS AND FEATURES
See Figure 6 for locations.
,_ WARNING: Improper operation
can lead to injury. Learn what the
controls do and how they work.
Thoroughly read and understand
entire Operator Manual.
CAUTION: AVOID INJURY. Read
,_ and understand the entire Safety
section before proceeding.
Engine/Blade Control
CAUTION: Check function of
_L, Engine/Blade Control regularly.
Improper function of control could
cause injury.
The engine/blade control must be held
against the handlebar to start the engine and
blade.
Engine/blade control feature on mower stops
engine and blade within 3 seconds whenever
operator releases handlebar. Check this
feature frequently. If feature fails to operate,
disconnect spark plug wire and adjust or have
it repaired before using unit.
STOP
START and RUN
Recoil Starter Handle
When pulled, the recoil starter handle will turn
engine over.
CUTTING HEIGHT ADJUSTMENT
DANGER: Avoid injury from
_, rotating blade.
ALWAYS shut off engine before
adjusting cutting height.
CAUTION: Both rear wheels must
,_ be set at same height or traction
drive may not work properly.
I[qlj i/I_[€']I T,I:
Position
1
2
3
4
5
6
[_-" I IIq-" r_,1:,11iI
Cutting Height-
in. (cm)
1-1/2(3.8)
2 (5.1)
2-3!8 (6.0)
2-3/4 (7.0)
3-1/4 (8.3)
3-5!8 (9.2)
GB- 11
Loading ...
Loading ...
Loading ...