Loading ...
Loading ...
Loading ...
Problem Possible Cause What To Do
No power/
washer not
working or
dead
Washer is unplugged
• Make sure cord is
plugged securely into a
working outlet.
Water supply is turned off
• Turn cold faucet fully on.
Circuit breaker/fuse is
tripped/blown
• Check house circuit
breaker/fuses. Replace
fuses or reset breaker.
Washer should have
separate outlet.
Automatic self system
checks
• First time the washer is
plugged in, automatic
checks occur. It may take
up to 2 minutes before
you can use your washer.
This is normal operation.
Snags, holes,
tears, rips
or excessive
wear
Overloaded
• The dry weight of the
load should be less than
18 lbs.
Pens, pencils, nails,
screws or other objects
left in pockets
• Remove loose items from
pockets.
Pins, snaps, hooks, sharp
buttons, belt buckles,
zippers and sharp objects
left in pockets
• Fasten snaps, hooks,
buttons and zippers.
Control time
wrong or
changes
This is normal
• During spin the washer
may need to rebalance
the load sometimes
to reduce vibrations.
When this happens,
the estimated time is
increased causing time
left to increase or jump.
Not enough
water
This is normal
• Horizontal washers do
not require the tub to fill
with water like top-load
washers.
Washer
pauses or
has to be
restarted, or
washer door
is locked and
will not open
Pump clogged
• See page 26 on how to
clean the Pump Filter.
32
Washer
Safety
Operation
Requirements
Installation
Instructions
Washer Use Washer Care
Troubleshooting
Loading ...
Loading ...
Loading ...