Loading ...
Loading ...
Loading ...
Fig. 35
If the drawer is in the top freezer:
u
Lift up the drawer at the front
Fig. 35 (1)
.
u
Take out to the front
Fig. 35 (2)
.
u
Slide the rails in.
Fig. 36
If the drawer is in the middle part of the freezer compart-
ment:
u
Pull out the drawer half-way.
u
Lift it up at the back from below
Fig. 36 (1)
.
u
Take out to the front
Fig. 36 (2)
.
u
Slide the rails in.
7.6.2 Inserting the drawer
Drawer without a pull-out system
Fig. 37
u
Insert the drawer as shown.
Drawer on telescopic rails
Fully extendible:*
Fig. 38
*
u
Slide the rails in.*
u
Place the drawer on the rails.*
u
Push all the way back.*
w
Fully extendible: Latches in audibly at the back.*
Partial pull-out fridge compartment:*
Fig. 39
*
u
Slide the rails in.*
u
Place the drawer on the rails.*
u
Push all the way back.*
Partial pull-out freezer compartment
Fig. 40
u
Slide the rails in.
u
Guide the drawer around the stoppers
Fig. 40 (1)
.
u
Place the drawer on the rails.
u
Push all the way back.
7.7 Fruit & Vegetable safe cover
You can remove the compartment cover for cleaning.
7.7.1 Removing the compartment cover
Ensure that the following conditions are met:
q
Bottle shelf is removed (see 7.5 Adjustable bottle shelf) .
Fig. 41
When the drawers are removed:
u
Pull the lid up at the front to the opening in the retaining
parts
Fig. 41 (1)
.
u
Lift from the back and pull it up and out
Fig. 41 (2)
.
7.7.2 Inserting the compartment cover
Fig. 42
If the text THIS SIDE UP points upwards:
u
Insert the lip of the cover over the opening of the rear
bracket
Fig. 42 (1)
and click into place
Fig. 42 (2)
.
u
Position the cover where you want it (see 7.8 Adjusting the
moisture levels) .
7.8 Adjusting the moisture levels
You can adjust the moisture in the drawer yourself by adjusting
the compartment cover.
Features
18 * Depending on model and options
Loading ...
Loading ...
Loading ...