Loading ...
Loading ...
Loading ...
LEVELING AND DOOR ALIGNMENT
LEVELING
After installing, plug the refrigerator's power cord into a
3-prong grounded outlet and push the refrigerator into the
final position.
Your refrigerator has two front leveling legs--one on the
right and one on the left. Adjust the legs to alter the tilt
from front-to-back or side-to-side. If your refrigerator seems
unsteady, or you want the doors to close more easily, adjust
the refrigerator's tilt using the instructions below:
NOTE: Tools Required: 11/16 inch wrench or fiat blade
screwdriver.
1. Turn the leveling leg to the left to raise that side of
the refrigerator or to the right to lower it. It may take
several turns of the leveling leg to adjust the tilt of the
refrigerator.
DOOR ALIGNMENT
If the space between your doors is uneven, follow the
instructions below to align the doors.
|. Remove the top hinge cover screws. Lift the hook located
at the bottom of the front side of the cover with a fiat-
head screwdriver.
2. Loosenthe top hinge bolts using a 10mm or 13/32-in.
socket wrench or open-end wrench.
3. Have someone hold the refrigerator door so the space
between the two door is even, and retighten the top hinge
bolts.
4. Replace the top hinge cover.
NOTE: Having someone push backward against the top of
the refrigerator takes some weight off of the leveling legs. This
makes it easier to adjust the legs.
2, Open both doors again and check to make sure that
they close easily. If the doors do not close easily, tilt the
refrigerator slightly more to the rear by turning both
leveling legs to the left. It may take several more turns,
and you should turn both leveling legs the same amount.
25
1 MFL67855601 Eng.indd 25 2013.7.25 8:51:45AM
Loading ...
Loading ...
Loading ...