Loading ...
Loading ...
Loading ...
Fie× Clean
To set a Flex Clean to start immediately (cont'd):
As soon as the controls are set, the motor driven door
lock will begin to close automatically. "door Lot" will
appear in the display (See Fig. 1). DO NOT open
the
oven door while "door Loc" is displayed (allow 15
seconds for the oven door to completely lock).
Once the door has locked "CLn" will appear in the
display indicating the oven will begin the self-clean
process(Fig.2).
Fig. 1 Fig. 2
When the Flex Clean cycle has completed:
,
2.
The time of day and "Hot" will appear in the display
window (See Fig.3).
Once the oven has cooled down for about I hour and
"Hot" is no longer displayed the "door OPn" message
should appear (Fig. 4). When this message turns off
the oven door may be opened. Use CAUTION and avoid
possible burns when opening the door after the self-
cleaning cycle has completed. The oven may still be
VERY HOT.
When the oven is cool, wipe away any residue or powdered
ash with a damp cloth or paper towel.
Fig. 3 Fig. 4-
If it becomes necessary to stop a Flex Clean cycle
once it has been activated:
1. Press Stop/Clear.
2. If the self-clean cycle has heated the oven to a high
temperature, allow enough time for the oven to cool and
for the "door OPn" message to appear (Fig. 4). When
this message turns OFF the oven door may be opened.
3. Restart the Flex Clean cycle once all conditions have
been corrected.
Setting delayed start Flex Clean cycle
Example: To start a delay Flex Clean with a default
clean time of 3 hours and a start time of 9:00 o'clock:
Step Press
1. Be sure the clock is set with the correct
time of day, ALL the oven racks are
removed and the oven door is closed.
2. Press Delay Start.
\s,,_/
3. Enter 900 for time to start.
®@@
A
4. Press Start.
5. Press Flex Clean. ctoo.
6. Press Start.
v
To avoid possible burns use care when opening the oven
door after the self-clean cycle. Stand to the side of the
oven when opening the door to allow hot air or steam to
escape.
DO NOT force the oven door open. This can damage
the automatic door locking system. Use CAUTION and
avoid possible burns when opening the door after the
Flex Clean cycle has completed. The oven may still be
VERY NOT.
Whenever the Flex Clean feature is active you may check
the amount of time remaining in the cycle by pressing the
Flex Clean pad once.
The oven door will be locked until the range has cooled
sufficiently. You should allow about 1 additional hour to
the time displayed before you can open the oven door.
The Flex Clean feature will not operate whenever a
surface element is turned ON. Flex Clean may be started
if the Cooktop Lockout feature is active. A Flex Clean
cycle cannot be started if the Oven Lockout feature is
active.
If a Flex Clean cycle was started and a power failure
occurs, the oven may not be thourghly cleaned. Once
_ower is restored, set self-clean again to finish.
iiii,_,,,¸.......
31
Loading ...
Loading ...
Loading ...