Loading ...
Loading ...
Loading ...
Setting Surface Controls
Radiant element power level display windows
The radiant element power level display feature provides a
digital display for each of the heating positions located on
the cooktop. Power levels are easily controlled and
monitored using the window displays in combination with
the corresponding control touch pads.
The Triple radiant heating element has 3 cooking sizes to
select from. This feature allows you to match the size of
the element to the size of the cookware you are using.
Available power level settings
The cooktop control will display heat levels ranging from Hi
(Fig. 1) to Lo (Fig. 6) and OFF (Fig. 7).
The settings between 9.5 (Fig. 2) and 3.0 (Fig. 3) decrease
or increase in increments of .5 (1/2). The Med (medium)
setting is 5.0. The settings between 2.8 (Figs. 4) and 1.2
(Fig. 5) are Simmer settings which decrease or increase in
increments of .2 to Lo (Fig. 6) for more precise settings at
lower heat levels.
Use the "Recommended Surface Settings Table"
provided later in this section to determine the correct
setting for the type of food you are preparing.
Hot surface window message (HE)
After using any of the radiant element positions the cooktop
will be very hot. After turning any of these elements OFF,
the cooktop will remain HOT for some time. The
corresponding HE (hot element-Fig. 8) message will remain
ON and turn OFF once that element position on the
cooktop has cooled sufficiently (Fig. 7).
Cooktop Lockout window message ( - - )
The (- -) message will appear whenever the Cooktop
Lockout feature is active. The cooktop features will not
operate during a Flex Clean cycle (See Fig. 9). Refer to the
Oven Lockout instructions additional lockout features.
Sabbath Day feature (Sb) message
The display windows will show the Sb message whenever
the Sabbath Day feature is active (Fig. 10). When
activated, the Sabbath Day feature works for both the
oven and cooktop together.
Once the Sabbath Day feature is active, changes to the
heat levels for the cooktop elements will not show in the
displays. The cooktop will react slower to heat level
changes. See "Setting the Sabbath Day feature" for
complete instructions.
Fig. 3
m
Fig. 5
//
Fig. 7
//
Fig. 9
Fig. 2
Fig. 4
B
Fig. 6
Fig. 8
Fig. 10
12
Loading ...
Loading ...
Loading ...