Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
38
Art No 215-0028 - Handrail fascia fixings
13. Servicing
n
BEFORE SERVICING ANY GAS CARRYING
COMPONENTS TURN OFF THE GAS SUPPLY
n
Check the appliance is gas sound after completion
of service. When checking for gas leaks do not use
washing up liquid – this can corrode. Use a product
specically manufactured for leak detection.
n
DO NOT use reconditioned or unauthorised gas
controls.
n
Disconnect from the electricity supply before
servicing, particularly before removing any of the
following: control panel, side panels, hotplate tray
or any electrical components or covers.
n
Before electrical reconnection, check that the
appliance is electrically safe.
1 Panels
1.1 To Remove the Control Panel
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Classic – Removing the Control Panel
Remove the handrail. Now remove the 2 cross-headed screws
hidden behind the handrail end brackets (Fig. 13.1).
Pull o all the control knobs and remove the xing screws
underneath the control panel.
Lift the control panel and pull forwards, taking care not to
damage or strain the wiring.
Professional + / Kitchener – Removing the Control Panel
Pull o all the control knobs.
Open the grill and right-hand oven doors and remove the
xing screws underneath the control panel.
The control panel should drop down slightly. It is held at the
top by 2 holes in the top edge, 1 at each end, that locate on
tags on the inner panel (Fig. 13.2). Clear the control panel
holes from the inner panel and pull the control panel forward.
Disconnect the wiring from the rear.
Reassemble in the reverse order. When replacing the leads
refer to the wiring diagram. Check the operation of the timer.
1.2 To Remove the Side Panels
n
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel (see 1.1). Pull the cooker forward.
Remove the 4 retaining screws for each panel (1 at the front
base, 1 on the top and 2 at the rear).
Reassemble in reverse order.
Fig. 13.1
Fig. 13.2
Fig. 13.3
Loading ...
Loading ...
Loading ...