Loading ...
Loading ...
Loading ...
KNOW YOUR SAW
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERAT-
ING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize
yourself with the location of the various controls and adjustments. Save this
manual for future reference.
Oiler Actuator/
Bar Oil Cap _ Chain Adjustment Screw
Lockout _ /
Button
Trigger Switch
Recessed Plug
TRIGGER SWITCH
The trigger switch is used to turn on the
unit. Squeeze the trigger switch to oper-
ate the unit after lockout button has
been pushed in. Release the trigger to
turn the unit off.
LOCKOUT BUTTON
The Lockout Button is a control feature
designed to prevent the motor from be-
ing accidently started. When the rear
handle is gripped in a normal cutting
position, the lockout button can be
pushed in by the thumb, permitting the
index finger to squeeze the trigger. It is
not necessary to maintain pressure on
the lockout button once the trigger has
been engaged.
BAR OIL CAP/OILER ACTUATOR
The oil cap is used to access the bar oil
tank and pressed to supply oil to chain.
CHAIN ADJUSTMENT SCREW
The chain adjustment screw is used to
adjust the chain tension.
RECESSED PLUG
The recessed plug is used to connect
the chain saw to an approved extension
cord.
CHAIN TENSION
It is normal for a new chain to stretch
during first 30 minutes of operation. You
should check your chain tension fre-
quently. Readjust chain after every 15
minutes of operation.See Chain Ten-
sion under the Service and Adjust-
ments section.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified
on your unit.
Extension cords are available for this unit.
Secure extension cord to power cord to
prevent disconnection from unit.
Power Cord
SELECT AN EXTENSION CORD
MINIMUM WIRE GAUGE
RECOMMENDATIONS
Volts 100 ft. or less 100 ft. to 150 ft.
120 14 12
A.W.G.* A.W.G.*
*American Wire Gauge
BEFORE STARTING SAW
WARNING: Be sure to read the elec-
trical safety information in the safety
rules section of this manual before you
begin. If you do not understand the
electrical safety information do not at-
tempt to use your unit. Seek help from
someone that does understand the in-
formation or call the customer assis-
tance help line at 1-800-235-5878.
GUIDE BAR AND CHAIN OIL
The manually operated chain oiler pro-
vides lubrication to the chain and guide
Loading ...
Loading ...
Loading ...